L
O
A
D
I
N
G
AEMالسعر شامل الجمارك وضريبة القيمة المضافة. الشحن يُحسب عند الدفع.
شاشة AEM CD-5G Carbon بدون تسجيل بيانات مع GPS داخلي
طقم شاشة، CD-5G
تتميز شاشات العدادات الرقمية CD-5 Carbon بشاشة ملونة بالكامل قابلة للقراءة في ضوء النهار، محاطة بهيكل متين وخفيف من مركب ألياف الكربون المصبوب بالتدفق. تمتد سبعة مصابيح LED فائقة السطوع على أعلى هيكل الشاشة لعرض عدد دورات المحرك (RPM) ومؤشر التبديل. يمكن للمستخدم برمجتها لتضيء تصاعديًا بزيادات محددة حسب نطاق الدورات، ولتومض عند حلول وقت التبديل.
يمكن للمستخدم برمجة سطوع مصابيح LED ثابتة اللون. يوجد زران كبيران على واجهة الشاشة يتيحان تغيير الصفحات وإعادة ضبط الذاكرة بسهولة حتى مع ارتداء قفازات القيادة. وتتوفر وظائف هذين الزرين أيضًا في الموصل الخلفي المرفق، مما يتيح للمستخدم تركيب أزرار عن بعد. ويوجد مصباحا LED إضافيان قابلان للبرمجة فوق زري التبديل أعلى الهيكل على جانبي مصابيح التبديل LED المدمجة.
تستقبل شاشة CD-5 Carbon القنوات من مدخلي CAN bus مستقلين، ولا تحتاج إلى وحدات خاصة لقراءة إشارات CAN من AEM و/أو الأطراف الثالثة. تم التحقق من قدرتها على الاتصال بأكثر من 250 جهازًا من غير AEM، ووحدات ECU الأصلية من موديلات 2008 وما بعدها (2008-up) عبر منفذ OBDII (راجع تبويب التطبيقات المدعومة)، ويمكن إضافة CD-5 Carbon إلى أي مركبة بإضافة وحدة حساسات CAN ذات 22 قناة.
شاشة CD-5 Carbon جاهزة للاتصال بوحدة ECU عبر CAN ولا تحتاج إلى وحدات خارجية للاتصال من CAN إلى CAN؛ فقط حمّل إعداداتك وانطلق! يمكن تسمية جميع القنوات بأي لغة تقريبًا، بحيث تكون المعلومات المعروضة مفهومة للمستخدم، سواء على لوحة العرض الرئيسية أو في تنبيهات التحذير. (3rd-party)
طقم شاشة، CD-5G، شاشة عدادات رقمية (Digital Dash Display)، شاشة سباق CD-5G بدون تسجيل بيانات ومزودة بـ GPS، إدخال CAN فقط، شاشة قطرها 5-inch، غلاف من ألياف الكربون، يشمل هوائي GPS وضفيرة الأسلاك
أضف وحدة Vehicle Dynamics Module لنظام GPS وجيروسكوب ثلاثي المحاور ومقياس تسارع ثلاثي المحاور (3 axis) لقياس قوى G والميلان الجانبي والأمامي والانعراج ورسم خريطة الحلبة وتوقيت اللفات (PN 30-2206، يُباع منفصلًا)
AEM CD-5G Carbon Non-Logging Display with Internal GPS
Display Kit, CD-5G
CD-5 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift.
Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons.
Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.
The CD-5 Carbon receives channels from two independent CAN bus inputs and it does not require special modules to read AEM and/or 3rd-party CAN signals.
We have validated it to communicate with over 250 non-AEM devices, 2008-up stock ECUs via the OBDII port (see Supported Apps Tab), and the CD-5 Carbon can be added to any vehicle with the addition of our 22 Channel CAN Sensor Module. The CD-5 Carbon is ECU CAN ready and does not require external modules for CAN to CAN communication, just load your configuration and go!
All channels can be named in virtually any language so that the information displayed makes sense to the user when displayed, whether on the main screen dashboard monitor or warning alerts.
Display Kit, CD-5G, Digital Dash Display, CD-5G non-logging, GPS enabled racing dash, CAN input only, 5-inch diagonal screen, carbon fiber enclosure, GPS antenna and wiring harness included