L
O
A
D
I
N
G
Aeromotiveالسعر شامل الجمارك وضريبة القيمة المضافة. الشحن يُحسب عند الدفع.
طرمبة ميكانيكية 12-Series تعمل بالمحور السداسي (Hex Drive)
طرمبة وقود ميكانيكية بتدفق 12 GPM تعمل بالمحور السداسي (Hex Drive). مصممة لتغذية محركات EFI والكاربريتر القوية، بالبنزين أو الإيثانول أو الميثانول. يجب تشغيل طرمبة 12 GPM Hex Drive بواسطة سداسي أنثى 3/8"، مما يسمح بتشغيلها من عمود الكامات أو من خلف طرمبة زيت dry-sump مجهزة بشكل صحيح.
ويمكن أيضاً تركيبها بعيداً عن المحرك، أو في مؤخرة المركبة، وتشغيلها بواسطة Heavy Duty Cable Drive مثل ذلك من Waterman Racing. يمكن استخدامها في التطبيقات عالية أو منخفضة الضغط. تدفق حتى 12 GPM. 5,000 HP على البنزين، وحتى 2500 HP على الميثانول. آلية ضخ Gerotor عالية الكفاءة. جسم متين مؤكسد بطلاء صلب Type III. مشغولة بـ CNC من ألمنيوم الطائرات 6061 T6.
طوق Hex Drive بنمط براغي Enderle ثلاثي. عمود إدارة سداسي ذكر قياسي 3/8". تشمل طرفاً مسنناً 1.25' ومدخل ذكر AN-16. منفذ مخرج أنثى ORB-12. تتطلب تطبيقات EFI منظمات تحويل (bypass) عالية التدفق.
12-Series Hex Drive Mechanical Pump
12 GPM Hex Drive Mechanical Fuel Pump. Designed to feed serious EFI and Carbureted engines, gasoline, ethanol or methanol. The 12 GPM Hex Drive Pump must be driven by a 3/8" female hex, allowing the pump to be driven from your camshaft or off the back of a properly prepared dry-sump oil pump.
It may also be mounted off the engine, or in the back of the vehicle, driven by a Heavy Duty Cable Drive like that from Waterman Racing. It can be used in high or low pressure applications. Flows u p to 12 GPM. 5,000 HP on gas, up to 2500 HP methanol. High efficiency, Gerotor pumping mechanism. Tough, Type III hard coat anodized body.
CNC Machined from 6061 T6 aircraft aluminum. Hex Drive Collar with 3-bolt Enderle bolt pattern. Standard male 3/8" hex driveshaft. Includes both 1.25' barb and AN-16 Male inlet. ORB-12 female outlet port. EFI applications require high-flow bypass regulators.
12 GPM Hex Drive Mechanical Fuel Pump. Designed to feed serious EFI and Carbureted engines, gasoline, ethanol or methanol. The 12 GPM Hex Drive Pump must be driven by a 3/8" female hex, allowing the pump to be driven from your camshaft or off the back of a properly prepared dry-sump oil pump.
It may also be mounted off the engine, or in the back of the vehicle, driven by a Heavy Duty Cable Drive like that from Waterman Racing. It can be used in high or low pressure applications. Flows up to 12 GPM. 5,000 HP on gas, up to 2500 HP methanol. High efficiency, Gerotor pumping mechanism. Tough, Type III hard coat anodized body. CNC Machined from 6061 T6 aircraft aluminum.
Hex Drive Collar with 3-bolt Enderle bolt pattern. Standard male 3/8" hex driveshaft. Includes both 1.25' barb and AN-16 Male inlet. ORB-12 female outlet port. EFI applications require high-flow bypass regulators.