L
O
A
D
I
N
G
السعر شامل الجمارك وضريبة القيمة المضافة. الشحن يُحسب عند الدفع.
التوافق مأخوذ من وصف القطعة. تأكد من مواصفات سيارتك قبل الطلب.
نظام عادم Cat-Back من الستانلس ستيل من Injen Technology
تصمم Injen Technology كل منتج أداء مع مراعاة سهولة التركيب، وهذا العادم ليس استثناءً. في SES9300 أضفنا أحزمة وفلنجات V-Band لأبسط وأسرع تركيب ممكن. لا حاجة لأي قص أو ثقب أو تعديل في السيارة لإتمام التركيب. يستخدم النظام جميع نقاط التثبيت الأصلية من المصنع لتركيب بسيط ومريح وتوافق تام.
ولزيادة الأداء، اخترنا ماسورة بقطر موحد 3.00in (76mm) من الفلنجة حتى الأطراف للحفاظ على ثبات معدل التدفق. والحفاظ على ثبات معدل التدفق لا يضيف أداءً فحسب، بل يساعد أيضاً على إبقاء نبرة العادم كما صممناها عبر نطاق دورات المحرك RPM بالكامل.
صُمم نظام العادم Cat-Back SES9300 من Injen Technology من الصفر ليكمّل التصميم الجريء والأداء الناري لهذه الوحوش الرياضية المخصصة للطرق الوعرة. لا يناسب هذا العادم طرازات البابين والأربعة أبواب فحسب، بل يناسب SES9300 أيضاً محرك 2.3L Turbo أو 2.7L Twin Turbo دون أي تعديلات إضافية.
يضبط تصميم الشكمان المزدوج المخصص لدينا نغمة المحرك بدقة لتصبح سيمفونية تطرب الأذن، حيث يقدم عمداً هديراً عميقاً ونقياً وواضحاً عند التباطؤ (Idle) وزئيراً عدوانياً عندما تدفع السيارة إلى أقصى حدودها.
صُنع نظام SES9300 بكامل طوله من مواسير ستانلس ستيل 304 ضخمة مقاس 3.00in (76mm) مثنية بتقنية mandrel. تسمح هذه المواسير الضخمة للتيربوهات بالتنفس والعمل بأقصى كفاءة. التشطيب المصقول الفاخر على الشكمانات سيبهر كل من يلقي نظرة على أسفل السيارة، وأطراف العادم (Tips) الجميلة باللون الأسود السيراميكي مقاس 4.00in (101.6mm) تمنح مظهراً رائعاً يكمّل صوت النظام بشكل مثالي.
يُعد نظام العادم المعدّل من أبسط التعديلات التي يمكنك إجراؤها على سيارتك، إذ يضيف القوة والطابع المميز معاً. ونحن نسهّل عليك اختيار نظام العادم بفضل جودة التصنيع المتفوقة والصوت والأداء. وكل ذلك مشمول بالضمان المحدود مدى الحياة الشهير عالمياً من Injen.
عادت سيارة Ford Bronco الأسطورية أخيراً، ورغم أن الانتظار كان طويلاً فقد كان يستحق ذلك بالتأكيد! أسطورة حقيقية مثل Ford Bronco لا تستحق إلا أفضل صوت عادم، ونظام العادم Cat-Back عالي الأداء Injen Technology SES9300 يحقق ذلك.
Injen Technology Stainless Steel Cat-Back Exhaust System
Injen Technology designs every performance product with ease of installation in mind and this exhaust is no different. On the SES9300 we've included V-Band clamps and flanges for the simplest, quickest installation possible. No need for any cutting, drilling, or modification of the vehicle to complete installation.
The system uses all factory mounting points for simple and convenient placement and compatibility. To increase performance, we opted for a single 3.00in (76mm) pipe size from flange to tips to keep flow rates consistent. Keeping the flow rate consistent not only adds performance but also helps keep the tone of the exhaust where we designed it to be throughout the RPM range.
The Injen Technology SES9300 cat-back exhaust system was designed from the ground up to compliment the aggressive styling and blistering performance of these sporty off-road beasts. Not only does this exhaust fit both 2-door and 4-door models, the SES9300 also fits either the 2.3L Turbo or the 2.7L Twin Turbo with no additional modifications.
Our custom dual muffler design fine tunes the tone of the engine into an ear-pleasing symphony. Purposefully delivering a crisp, clean, deep rumble at idle and an aggressive roar when you're pushing the limits.
The entire length of the SES9300 was constructed from massive 3.00in (76mm) mandrel-bent 304 stainless-steel tubing. This massive tubing allows those turbos to breathe and perform at their peak efficiency.
The premium polished finish on the mufflers are sure to impress anyone curious enough to take a look at the undercarriage and the beautiful 4.00in (101.6mm) ceramic black exhaust tips offer superb aesthetics that perfectly compliment the sound of the system itself.
An aftermarket exhaust system is one of the simplest modifications you can make to your vehicle that will add both power and personality to your ride. We make choosing an exhaust system easy with our superior build quality, tone, and performance. All protected by the world renowned Injen Limited Lifetime Warranty.
The legendary Ford Bronco has finally returned and while the wait was long, it was definitely worth the wait! A true legend like the Ford Bronco only deserves the best sounding exhaust and the Injen Technology SES9300 Performance Cat-Back Exhaust System delivers.