L
O
A
D
I
N
G
ICONالسعر شامل الجمارك وضريبة القيمة المضافة. الشحن يُحسب عند الدفع.
نفدت الكمية حالياً
ما فيه موعد مؤكد لرجوعها حالياً.
نرسل لك رسالة واتساب أول ما ترجع
التوافق مأخوذ من وصف القطعة. تأكد من مواصفات سيارتك قبل الطلب.
صُممت أنظمة تعليق ICON Vehicle Dynamics لـ Toyota Tacoma 2024-2026 مع وضع الأداء الأقصى والسائق الجاد في الاعتبار. ينصبّ تركيز مهندسي ICON بشكل أساسي على زيادة مدى حركة العجلات وقدرة التخميد، ما ينعكس على تحكم ممتاز بالمركبة وجودة قيادة عالية على الطرق المعبدة وخارجها.
يتضمن نظام Stage 5 هذا مساعدات كويل أوفر من فئة 2.5 Series مضبوطة خصيصاً للمركبة، مزودة بخزانات خارجية (Remote Reservoirs) مجهزة بصمامات CDCV، وسوست (Coil Springs) من تصميم ICON لإحساس أفضل بالمركبة على امتداد مدى الحركة.
تزيد الخزانات الخارجية بشكل كبير من حجم زيت المساعد ومساحة سطح تبديد الحرارة لمقاومة السخونة الزائدة والتكهف (Cavitation) تحت الاستخدام الشاق، وهما ما قد يؤديان إلى تراجع أداء التخميد (Damper Fade). صمامات ICON CDC المرفقة هي صمامات قابلة للتعديل خارجياً تقيّد تدفق الزيت إلى الخزان، ما يوفر 10 مستويات من نطاقات قوة تخميد الانضغاط.
كما أن ارتفاع هذه الكويل أوفر قابل للتعديل بمقدار 1.25-3” من الرفع الأمامي فوق الارتفاع الأصلي، ما يتيح استخدام تركيبات جنوط وإطارات أكبر حجماً وأكثر جرأة. يعمل الجمع بين حوامل إنزال الدفرنس الأمامي وأطوال الكويل أوفر المصممة خصيصاً من ICON على تحقيق أقصى مدى حركة متاح للتعليق الأمامي ومنع انحشار عكوس CV (CV Bind).
بالإضافة إلى ذلك، تحل جلب تثبيت الدفرنس المصنوعة من البولي يوريثان محل جلب OE اللينة للمساعدة في الحد من حركة الدفرنس تحت الحمل.
صُمم طقم المقص العلوي الأنبوبي من ICON لتحسين الأداء العام لسيارة Toyota Tacoma الجديدة 2024-2026 من خلال تصحيح هندسة الواجهة الأمامية، وزاوية Caster إضافية مدمجة، وتحسين الخلوص بين مكونات التعليق.
ويتيح استبدال كرة المقص الأصلية (OE) بـ ICON Delta Joint PRO الجديد كلياً والقابل للصيانة وإعادة البناء مدى حركة كاملاً للتعليق الأمامي في الانضغاط والتدلي (Bump & Droop) مع التخلص من التعليق والاحتكاك (Bind).
ويوفر تصميم السوست الخلفية ثنائية المعدل معدل قيادة أنعم مع معدل تحميل زائد أكثر صلابة، ليجمعا بين الراحة على الطريق ودعم ممتاز للأحمال ومقاومة للارتطام بالقاع وأداء فائق على الطرق الوعرة.
صُممت هذه السوست الخلفية لتوفير رفع صافٍ مقداره .5" في الخلف فوق الارتفاع الأصلي مع إضافة وزن يقارب 600lbs في الخلف، لوقفة أكثر شراسة وخلوص أكبر في الرفارف لجنوط وإطارات أكبر في المركبات الأكثر تجهيزاً.
توفر مساعدات ICON الخلفية 2.5 Aluminum Series CDCV بخزان منفصل (Remote Reservoir) مع مناطق ارتداد مدمجة (Bump Zones) قدرة تخميد محسّنة، وتستخدم ضبط صمامات مخصصاً للمركبة يوازن أداء الشاحنة من الأمام إلى الخلف.
ويُعد نظام التعليق Stage 5 من ICON Vehicle Dynamics لـ Toyota Tacoma 2024-2026 خياراً ممتازاً للسائقين الراغبين في تعزيز قدرات البيك أب على الطريق وعلى الطرق الترابية كذلك.
ملاحظة التركيب #206: هذا الطقم مُعد للتركيب على طرازات الدفع الرباعي 4WD. عند التركيب على Toyota Tacoma بدفع ثنائي 2WD، لا حاجة لطقم تنزيل الدفرنس الأمامي رقم القطعة 55160، ويمكن شراء باقي مكونات نظام التعليق بشكل منفصل مع الحفاظ على كامل وظائف النظام. أطقم مخصصة لطرازات 2WD قادمة قريباً!
ملاحظة تركيب رقم 191: نطاقات ارتفاع الرفع المعلنة مبنية على سيارة بوزن إضافي يقارب 600lbs في الخلف. زيادة وزن السيارة أو إنقاصه بسبب الإكسسوارات سيغيّر نطاق الرفع.
24-26 TACOMA 1.25-3" STAGE 5 SUSPENSION SYSTEM TUBULAR OVERLAND REAR COILS
ICON Vehicle Dynamics 2024-2026 Toyota Tacoma suspension systems are designed with maximum performance and the serious driver in mind. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on- and off-road.
This Stage 5 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring CDCV equipped remote reservoirs and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade.
The included ICON CDC Valves are externally adjustable valves that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. These coilovers are also height adjustable from 1.25-3” of front lift height over stock, allowing the use of larger, more aggressive wheel and tire combinations.
The combination of front differential drop brackets and ICON’s specifically designed coilover lengths maximizes the available front suspension travel and prevent CV bind. Additionally, polyurethane differential mounting bushings replace the soft OE bushings to help limit differential movement under load.
ICON tubular upper control arm kit is designed to improve the overall performance of the new 2024-2026 Toyota Tacoma with corrected front-end geometry, built in additional caster, and improved suspension component clearance.
Replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.
The rear dual rate coil design provides a softer ride rate with a firmer overload rate that combine to deliver on-road comfort with excellent load support, bottoming resistance, and superior off-road performance.
These rear springs are designed to net .5" of rear lift over stock with approximately 600lbs of additional weight added to the rear, for a more aggressive stance and increased fender clearance for larger wheels and tires on more outfitted vehicles.
ICON 2.5 Aluminum Series CDCV remote reservoir rear shocks with integrated bump zones provide improved shock damping ability and utilize a vehicle-specific valving that balances the performance of the truck from front to rear.
The ICON Vehicle Dynamics 2024-2026 Toyota Tacoma Stage 5 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.
Dual rate rear coil springs improve performance and ride quality while providing .5" rear lift height over stock with approximately 600lbs of additional weight in the rear
UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation
Important notes