L
O
A
D
I
N
G
ICONالسعر شامل الجمارك وضريبة القيمة المضافة. الشحن يُحسب عند الدفع.
التوافق مأخوذ من وصف القطعة. تأكد من مواصفات سيارتك قبل الطلب.
نظام تعليق Stage 1 رفع 2-2.25" لـ Ford F150 Raptor 21-26 - Overland
نظام Stage 1 هذا مهيأ لسيارات Raptor المجهزة بإضافات أكثر والتي تحمل حمولة ثابتة في الصندوق، مع سوست خلفية (Coil Springs) ثلاثية المعدل مصممة لتوفير رفع خلفي بمقدار 1" لسيارات Raptor التي تحمل وزناً إضافياً في الخلف يبلغ نحو 300lbs. وتضمن معدلات التدلي (Droop) والقيادة (Ride) والحمل الزائد (Overload) المصممة هندسياً من ICON أداءً مثالياً لنظام التعليق في مختلف ظروف القيادة.
يوازن معدل القيادة عالي الأداء بين الراحة والمرونة، بينما يعزز معدل الحمل الزائد القدرة على تحمل الأحمال ومقاومة ارتطام نهاية الشوط (Bottom-out). ولتحقيق أقصى قدر من المفصلية (Articulation) والكفاءة، تتميز السوست الخلفية بتصميم سلك مستدق (Tapered Wire) يوفر شوط تدلٍّ استثنائياً وقدرة عالية على الطرق الوعرة.
حوّل أداء ووقفة سيارتك F-150 Raptor من الجيل الثالث (Gen3) مع نظام التعليق Stage 1 من ICON Vehicle Dynamics، المصمم خصيصاً للمركبات المزودة بمساعدات OE الأصلية. تعتمد السوست الأمامية (Coil Springs) على معدل سوستة خطي لأداء ثابت وتحكم دقيق، مع توفير رفع أمامي بمقدار 2.25" لطرازات Raptor القياسية و2" لطرازات Raptor R، لتمنحك مظهراً جريئاً وخلوصاً أرضياً أكبر.
وقد صُممت لتتوافق بسلاسة تامة، إذ تحافظ على كامل وظائف المساعدات الإلكترونية مع تعزيز قدرات شاحنتك وجودة ركوبها.
صُممت هذه السوست لتجمع بين المتانة وسهولة التركيب، وتتميز بطلاء بودرة ثنائي المراحل يحمي من التآكل في أي بيئة. تصميمها القابل للتركيب المباشر (Bolt-on) يلغي الحاجة إلى القص أو التعديل، مما يتيح تركيباً سهلاً. ومع ضمان مدى الحياة ضد الهبوط أو الكسر، تعيد هذه السوست (Coil Springs) تعريف أداء Raptor على الطرق المعبدة والوعرة، مقدمةً موثوقية وثقة لا مثيل لهما أينما أخذتك الرحلة.
ملاحظة تركيب رقم 181: نطاقات ارتفاع الرفع المعلنة مبنية على سيارة بوزن إضافي يقارب 300lbs في الخلف. زيادة وزن السيارة أو إنقاصه بسبب الإكسسوارات سيغيّر نطاق الرفع.
ملاحظة تركيب رقم 187: يناسب الكويل أوفر الأصلي (OE) فقط. لا يناسب كويل أوفر ICON أو غيرها من القطع المعدّلة (Aftermarket).
21-26 FORD F150 RAPTOR 2-2.25" STAGE 1 SUSPENSION SYSTEM OVERLAND
This Stage 1 system is configured for more upfitted Raptors that have constant load in the bed, with triple-rate rear coil springs tailored to deliver a 1" rear lift on Raptors with approximately 300lbs of additional rear weight. ICON-engineered droop, ride, and overload rates ensure optimal suspension performance across a variety of driving conditions.
The performance ride rate balances comfort and compliance, while the overload rate enhances load handling and bottom-out resistance. For maximum articulation and efficiency, the rear coils feature a tapered wire design, providing exceptional droop travel and off-road capability.
Transform your Gen3 F-150 Raptor’s performance and stance with the ICON Vehicle Dynamics Stage 1 suspension system, engineered specifically for vehicles equipped with OE shock absorbers.
The front coil springs utilize a linear spring rate for consistent performance and precise handling while delivering 2.25" of front lift for standard Raptors and 2" for Raptor R models, ensuring an aggressive look and increased ground clearance.
Designed for seamless compatibility, they maintain full electronic shock functionality while enhancing your truck's capability and ride quality.
Built for both durability and ease of installation, these springs feature a dual-stage powder coating that protects against corrosion in any environment. Their bolt-on design eliminates the need for cutting or modifications, allowing for a straightforward install.
Backed by a lifetime guarantee against sagging or breakage, these coil springs redefine your Raptor’s on- and off-road performance, delivering unmatched reliability and confidence wherever the journey takes you.
Important notes